Speaker Setup - Onkyo TX-NR801 Instruction Manual

Selecting the Appropriate Setting for Your Connections—Continued
DIRECT / PURE AUDIO STEREO
SETUP/ENTER/
RETURN/Cursor
/ / /

Speaker Setup

After you have installed the TX-NR801/TX-NR801E,
connected all the components, and determined the
speaker layout, it is now time to perform the settings in
the Speaker Setup Menu to optimize the sound acoustics
for your environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following items:
• The types and sizes of the speakers that are connected.
• The distance from each speaker to the normal
listening position.
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
→Advanced Menu
[ENTER]Quit:[SETUP]
Memo:
Front Front Front
Left Left Left
[
[ ] m/ft
SL
[
[ ] m/ft
Note:
When "Large" is set, the complete frequency range for
that speaker channel will be output. When "Small" is set,
the frequencies below 80 Hz for that speaker channel are
output to the subwoofer. If there is no subwoofer, then
32
SETUP
TUNING
ENTER
RE TURN
PRESET
SURROUND THX DSP MEMORY FM MODE A-FO RM LISTENING MODE MEMORY
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
[ENTER]Quit:[SETUP]
Monitor
Front Front Front
SW Center
Right Right Right
]
[ ] m/ft
m/ft
[ ] m/ft
SR
] m/ft [ ] m/ft
[ ] m/ft
SBL SBR
they will be output to the left and right front speakers.
(Set all speakers for THX speaker systems to "small.")
If you want to perform these operations using the remote
controller, first press the RCVR button.
1 Display the main menu.
Press the SETUP button on the front panel or
SETUP button on the remote controller to display
the main menu on the monitor and front display.
2
Use the and
"1. Speaker Setup" and then press the
ENTER button.
The "Speaker Setup" menu appears.
3
Use the and
an item and then press the ENTER button.
4
Use the and
an item and then use the
buttons to set the desired value.
5 Press the SETUP button to exit the Setup
menu.
Press the RETURN button to return to the previ-
ous menu.
cursor buttons to select
cursor buttons to select
cursor buttons to select
and cursor