Displaying Radio Text (Rt); Performing A Pty Scan; Performing A Tp Scan - Onkyo TX-SR601E Instruction Manual

Listening to RDS broadcasts (European models only)

Displaying Radio Text (RT)

If the station you are currently tuned into is broadcasting RT
signals, they will be displayed in the front display of the TX-
SR701E/601E. If the station does not, this function will be ignored.
1. To display the radio text, press the
RT/PTY/TP button once.
• If the station you are currently listening to is not an RDS
station, only the frequency of the station will appear.
• If "Waiting" appears on the display, more time is required to
receive the RT information. When the information is received,
the characters will scroll across the front display.
• If "No Text Data" appears on the display, RT information is not
available.
• The display shows the frequency for 3 seconds and returns to
program service name.

Performing a PTY scan

1. Press the TUNER input source
button and select the FM input
source.
2. Press the RT/PTY/TP button twice.
The current program type appears on the
display.
3. Using the / buttons, select the
PTY program type you desire.
40
PRESET
RT/PTY/TP
STANDBY/ON
POWER
STANDBY
ON OFF
LISTENING MODE
REC OUT ZONE 2 OFF LEVEL DISPLAY RT/PTY/TP STEREO SURROUND THX DSP
PHONES
DIRECT/
AUDIO
VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4
PURE AUDIO SELECTOR DVD TAPE
PURE AUDIO
VCR 1 VCR 2
4. Press the ENTER button.
5. Press the ENTER button when it
1. Press the TUNER input source
TUNER
2. Press the RT/PTY/TP button three
TUNI NG
3. Press the ENTER button.
PRESET
/
MASTER VOLUME
AUDIO
ADJUST SETUP RETURN
TUNI NG
PRESET
MEMORY FM MODE ENTER
CLEAR
VIDEO 4 INPUT
TUNER CD PHONO
DIGITAL S VIDEO VIDEO L AUDIO R
ENTER
TUNER
The TX-SR701E/601E will scan until it
reaches a station of the program type you
selected. It will then stop briefly at that
station before continuing on until it
reaches the next station. Pressing the
ENTER button stops the PTY scan at that
point. If you press the RT/PTY/TP while
"NONE" is displayed, "PTY ?" will
appear. In this case, return to step 3.
reaches the station to which you
want to listen.
"Not Found" will appear when no RDS
signal is being received from the station.

Performing a TP scan

button and select the FM input
source.
times.
"[TP]" will appear if the current station is broadcasting TP
signals. This station will periodically broadcast traffic
information. To find a different station, proceed to the next step.
Also, if "TP" is displayed, proceed to the next step.
The TX-SR701E/601E will scan until it
reaches a station broadcasting traffic
information. If "Not Found" appears on
the display, a TP station cannot be located.
TUNER