Specifications - Onkyo TX-NR801 Instruction Manual

Specifications
AMPLIFIER SECTION
Continuous average power output (FTC) (USA and Canadian mod-
els):
All channels:
Continuous power output (DIN)
(European model):
Maximum power output (EIAJ)
(Asian model):
Dynamic power output (stereo) 2 × 250 W at 3 Ω
Total Harmonic Distortion:
IM Distortion:
Damping factor:
Input sensitivity and impedance
PHONO:
LINE (CD, TAPE, DVD,
VIDEO 1-5):
MULTICHANNEL INPUT
(FRONT L/C/R, SUR-
ROUND L/R, SURROUND
BACK L/R):
(SUBWOOFER):
COAXIAL 1, 2, 3 (DIGI-
TAL):
DVD, VIDEO 1, 2, 3, 4, 5:
COMPONENT VIDEO 1, 2: 1 Vp-p, 75 Ω (Y)
Output level and impedance
Rec out (TAPE, VIDEO 1,2): 200 mV, 470 Ω
Pre out:
ZONE 2 OUT:
VIDEO (VIDEO 1, 2, MONI-
TOR OUT, ZONE 2 OUT):
S-VIDEO (VIDEO 1, 2,
MONITOR OUT):
COMPONENT VIDEO OUT: 1 Vp-p, 75 Ω (Y)
Phono overload:
Frequency response:
RIAA deviation:
Tone Control
Bass:
Treble:
Signal-to-noise ratio (direct)
PHONO:
Line:
Ethernet port:
Supported audio file format:
94
100 W per channel min. RMS
into 8 Ω, 2 channels driven from
20 Hz to 20 kHz with no more
than 0.08% total harmonic dis-
tortion.
130 W min. RMS into 6 Ω,
2 channels driven, 1 kHz with no
more than 0.1% total harmonic
distortion.
135 W at 6 Ω
160 W at 6 Ω
2 × 210 W at 4 Ω
2 × 130 W at 8 Ω
0.08% at rated power
0.08% at 1 W output
0.08% at rated power
0.08% at 1 W output
60 at 8 Ω
2.5 mV, 50 kΩ
200 mV, 50 kΩ
200 mV, 50 kΩ
36 mV, 50 kΩ
0.5 Vp-p, 75 Ω
1 Vp-p, 75 Ω (Composite Video)
1 Vp-p, 75 Ω (S-Video, Y signal)
0.28 Vp-p, 75 Ω (S-Video, C sig-
nal)
0.7 Vp-p, 75 Ω (P
/C , P /C )
B B R R
1 V, 470 Ω
100 mV, 470 Ω
1 Vp-p, 75 Ω (Composite Video)
1 Vp-p, 75 Ω (S-Video, Y signal)
0.28 Vp-p, 75 Ω (S-Video, C sig-
nal)
0.7 Vp-p, 75 Ω (P
/C , P /C )
B B R R
120 mV RMS at 1 kHz, 0.5%
T.H.D.
10 Hz to 100 kHz: +1/–3 dB (CD
in Direct mode)
20 Hz to 20 kHz: ±0.8 dB
±10 dB at 50 Hz
±10 dB at 20,000 Hz
80 dB (IHF A, 5 mV input)
110 dB (IHF A, 0.5 V input)
100BASE-TX
MP3, WMA, WAV (non-compres-
sion, sampling rates of 32 kHz,
44.1 kHz, and 48 kHz supported)
TUNER SECTION
FM
Tuning range
USA & Canadian models:
Other models:
Usable sensitivity
Mono:
Stereo:
50 dB quieting sensitivity
Mono:
Stereo:
Capture ratio:
Image rejection ratio
USA & Canadian models:
Other models:
IF rejection ratio:
Signal-to-noise ratio
Mono:
Stereo:
Alternate channel attenuation: Mono 55 dB
Selectivity:
AM suppression ratio:
Total harmonic distortion
Mono:
Stereo:
Frequency response:
Stereo separation:
AM
Tuning range
USA & Canadian models:
Other than worldwide models: 522–1,611 kHz (9 kHz steps)
Worldwide models:
Usable sensitivity:
Image rejection ratio:
IF rejection ratio:
Signal-to-noise ratio:
Total harmonic distortion:
GENERAL
Power supply
USA & Canadian models:
European & Australian mod-
els:
Some Asian models:
Worldwide models:
Power consumption
USA & Canadian models:
Other models:
Dimensions (W × H × D):
Weight
USA & Canadian models:
Other models:
Specifications and features are subject to change without
notice.
87.50–108.00 MHz (100 kHz
steps)
87.50–108.00 MHz (50 kHz steps)
11.2 dBf, 1.0 µV (75 Ω, IHF)
0.9 µV (75 Ω, DIN)
17.2 dBf, 2.0 µV (75 Ω, IHF)
23 µV (75 Ω DIN)
17.2 dBf, 2.0 µV (75 Ω)
37.2 dBf, 20.0 µV (75 Ω)
2.0 dB
40 dB
85 dB
90 dB
76 dB
70 dB
50 dB (DIN)
50 dB
0.2%
0.3%
30 Hz–15 kHz, ±1.0 dB
45 dB at 1 kHz
30 dB at 100 Hz–10 kHz
530–1,710 kHz (10 kHz steps)
522–1,611 kHz (9 kHz steps), or
530–1,710 kHz (10 kHz steps)
30 µV
40 dB
40 dB
40 dB
0.7%
AC 120 V, 60 Hz
AC 230-240 V, 50 Hz
AC 220-230 V, 50/60 Hz
AC 220-230 V and 120 V switch-
able, 50/60 Hz
8.1 A
655 W
435 × 175 × 459 mm
17-1/8" × 6-7/8" × 18-1/16"
16.8 kg (37.1 lbs)
17.8 kg (39.3 lbs)