Video Setup Sub-Menu - Onkyo TX-NR801 Instruction Manual

Configuring Input Settings Suitable for Your Connections—Continued
Input source selected
CD
PHONO
TUNER
TAPE
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5

Video Setup Sub-menu

When the default input settings does not suit your con-
nection, perform the following procedures to configure
your input settings.
2-3.Video Setup
a.Video
b.Component Video
a. Video
This setting allows you to match the audio from one
component with the video from another. Therefore, you
can set a video source to be displayed while the audio
from another input source is heard. For example, this
allows you to play the music from a compact disc, while
displaying the picture from a video cassette player or
other video source.
The default settings are given below.
Input source selected
CD
PHONO
TUNER
TAPE
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
NET AUDIO
The settings in this sub-menu apply to the video and S
video signals. Available options for the video source to
be displayed are "DVD," "VIDEO 1" to "VIDEO 5,"
"Last Valid" and "----."
DVD, VIDEO 1-5: Select either the video signal from
the VIDEO or S VIDEO terminal for each video input.
Last Valid: Select to have the video of the previous
input source continued. For example, if the selected
38
Multichannel
No
No
No
No
Yes
No
No
No
No
No
Input:DVD
:DVD
:INPUT1
Quit:[SETUP]
Video
Last Valid
Last Valid
Last Valid
Last Valid
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
Last Valid
input source is VIDEO 1, and you then change to CD
(set to "Last Valid"), then the audio from the CD input
is played while the video from VIDEO 1 continues.
----: Set this option when you do not want any video
inputs to be displayed.
b. Component Video
Use this setting if you connect monitors like TV to the
COMPONENT VIDEO OUTPUT jacks on the
TX-NR801/TX-NR801E.
The default settings are given below.
Input source selected
CD
PHONO
TUNER
TAPE
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
NET AUDIO
For example, when you connect the DVD player to the
COMPONENT VIDEO INPUT 2 jacks, select "DVD"
as input source and set "b. Component Video" to
"INPUT 2."
Available component video inputs are "INPUT 1,"
"INPUT 2," "VIDEO*," "Last Valid," and "None*."
INPUT 1: The video signals from devices connected to
the INPUT 1 of the COMPONENT VIDEO input banks
are used.
INPUT 2: The video signals from devices connected to
the INPUT 2 of the COMPONENT VIDEO input banks
are used.
VIDEO*: The video signals assigned in the "a. Video"
sub-menu setting are used. This option is useful when
no devices are connected to the INPUT 1 and INPUT 2
of the COMPONENT VIDEO input banks.
Last Valid (enables the source last selected): Select to
have the video of the previous input source continued.
None*: No video signals are assigned. When you select
"None," the OSD screen disappears. If you want to
change this setting later on, use the front panel display
on the TX-NR801/TX-NR801E.
*Valid only when the PAL format is used in an area other than
USA, Canada and Australia.
Note (When the model is for USA, Canada or Austra-
lia and its TV format is PAL):
When the component video signal is output, the infor-
mation on the NET AUDIO and Immediate Display (see
page 63) will not be displayed.
Component video input
Last Valid
Last Valid
Last Valid
Last Valid
INPUT 1
INPUT 2
INPUT 2
INPUT 2
INPUT 2
INPUT 2
Last Valid