Operating Onkyo Products Using The Remote Controller; Operating Onkyo Products Using The Connection - Onkyo TX-NR801 Instruction Manual

Operating Onkyo Products Using the Remote
Controller
The RC-511M remote controller is a useful tool that can
not only operate the TX-NR801/TX-NR801E, but also all
the other components of your home theater as well. To
operate any component, first press the Mode button on the
remote controller that corresponds to the component that
you wish to control. Then simply press the desired opera-
tion button and the component will operate accordingly.
To operate a digital satellite tuner, cable, VCR, or televi-
sion with the remote controller, first program the signal to
the button.
There are two methods. One method is selecting the
name of a different brand from the table, entering the
setting number listed, and calling up the pre-program-
ming code (See page 83). The other method is sending
the commands from the other brand's remote control
directly into this remote controller (See pages 86-87).
Operating Onkyo Products Using the
Connection
Connecting your
MD recorder, DVD player, or cassette recorder to the
TX-NR801/TX-NR801E via
your system with the TX-NR801/TX-NR801E's remote
controller by pointing it at the TX-NR801/TX-NR801E.
This allows you to control components that are out of
sight, for example, in a cabinet. Since you don't have to
enter any special codes, or do any programming,
ON
RETURN
ENTER,
/ / /
DISC
TOP
MENU
AUDIO
SEL
ANGLE
Note:
When operating an Onkyo DVD
player directly with the remote
controller without connecting the
terminals, pre-program-
ming is necessary (See page 82).
80
-compatible Onkyo CD player,
allows you to control
ON
STANDBY
STANDBY
SETUP
/ / /
DVD
MODE
ENTER
SETUP
RETURN
TOP MENU or
VOL
MENU
MENU
DISC
MUTING
AUDIO SEL
SUBTITLE
ANGLE
DVD
SUBTITLE
operation
SEARCH
buttons
RANDOM
Numeric
keys
SEARCH
0, 1 to 9, +10
VOL
MUTING
allows you to control these components quickly and
easily. See page 26 for connection information.
Note:
To use the function, you must make an
tion and an analog RCA/phono connection between the
AV component and your TX-NR801/TX-NR801E, even
if they are connected digitally.
MODE buttons
1
Press the MODE button.
• When operating the Onkyo cassette tape deck,
press the RCVR MODE button.
• When operating the Onkyo DVD player, press
the DVD MODE button.
• When operating the Onkyo CD player, press
the CD MODE button.
• When operating the Onkyo MD player, press
the SAT/MD MODE button.
2
Point the remote controller at the
TX-NR801/TX-NR801E and press the
desired operation button.
Turns DVD player on and off
Turns DVD player off (Some sets may not respond to this button. In this
case, use the ON button to put the DVD player in the standby state.)
Displays the OSD of the DVD player
Moves cursor in the OSD Menu of the DVD player
Enter button for the OSD Menu of the DVD player
Return button for the OSD Menu of the DVD player
Displays menu screens recorded on DVD media
Selects disc in DVD changer
Selects audio or language track (if recorded on the DVD)
Selects a camera angle (if recorded on the DVD)
Selects subtitle language (if recorded on the DVD)
Searches for location on disc to start playback
Random playback
Chapter/Track down
Chapter/Track up
Play
Stop
Fast reverse
Fast forward
Pause
Opens/closes the disc tray
Numeric keys
Adjusts volume at TX-NR801/TX-NR801E
Activates muting function at TX-NR801/TX-NR801E
DVD mode
connec-