Input Setup (Basic); Labelling The Input Source (Character Input) - Onkyo TX-NR801 Instruction Manual

Input Setup (Basic)

TUNING
PRESET
THX DSP MEMORY FM MODE A-FO RM LISTENING MODE MEMORY
Labelling the Input Source
(Character Input)
This sub-menu allows you to give names to the stations
you have preset for the AM/FM tuner, and to the input
sources you have connected (excluding the tuner itself).
Up to 10 characters can be entered for each name. For
example, if you have a DVD connected to the VIDEO4
jack, then you can give it the name "DVD2." Or, if you
have multiple VCRs connected, you can enter the model
names or manufacturer names for each one so that you
do not have to remember which is connected to which
input source.
The illustrations used here represent the remote control-
ler. When you perform the procedures on the
TX-NR801/TX-NR801E, use the corresponding buttons
on the front panel.
1
First, press the RCVR button, and
then press the INPUT SELECTOR
button.
If you want to enter a name for a preset
broadcast radio station, select the station
that you want to name and enter the
name.
2
Press the SETUP button to display
the main menu on the monitor and
front display.
52
SETUP
ENTER
RE TURN
RCVR
SETUP/
ENTER/
Cursor
/ / /
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
→Advanced Menu
[ENTER]Quit:[SETUP]
3
Use the
select "2. Input Setup" and then
press the ENTER button.
The "Input Setup" menu appears.
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
4
Use the
select "Character Input" and then
press the ENTER button.
The "Character Input" menu appears.
2-4.Character Input
a.Character Display
b.Character
5
Use the
select "a. Character Display" and
then use the
tons to set "Yes."
2-4.Character Input
a.Character Display
b.Character
Yes: Select to have your custom name
displayed.
No: Select to have the default name dis-
played.
6
Use the
select "b. Character."
Press the
current entry.
Press the
Character Input screen.
and cursor buttons to
Input:DVD
[ENTER]Quit:[SETUP]
and cursor buttons to
Input:DVD
:No
:
Press to edit.
to clear.
Quit:[SETUP]
and cursor buttons to
and cursor but-
Input:DVD
:Yes
:
Press to edit.
to clear.
Quit:[SETUP]
and cursor buttons to
cursor button to clear the
cursor button to bring up the