Enjoying Analog Multichannel Audio Playback; Connecting To Devices With Analog Multichannel Output; Setup For Multichannel Output - Onkyo TX-NR801 Instruction Manual

Enjoying Analog Multichannel Audio Playback

If your device (such as a DVD player or MPEG decoder)
has a 5.1/7.1 channel analog output, you can enjoy ana-
log multichannel audio playback.
Connecting to Devices with Analog
Multichannel Output
Connect the MULTI CH INPUT jacks of the TX-NR801/
TX-NR801E to the 5.1 channel output jacks of the device.
Make sure that you properly connect the left channels to
the L jacks and the right channels to the R jacks.
Front output
Subwoofer
to Purple
Surround
R L R
R L
R
OUTPUT
OUTPUT
OUTPUT
Ex: DVD-Audio player/
MPEG decoder
OUTPUT OUTPUT
R L
R L
to Brown
Center

Setup for Multichannel Output

DIRECT / PURE AUDIO STEREO SURROUND THX DSP
SURROUND
DIRECT/
PURE AUDIO
AUDIO SELECTOR
To enjoy multichannel audio, you need to perform the
settings under the "Multichannel Setup" menu.
The procedures shown below assume using the remote
controller. When performing these procedures using the
64
L to White
to Red
R
L
to Blue MULTI CH
INPUT
R
R
to Gray
L
R
FRONT
L
SUB CENTER
SURR
L
R
L
SURR
BACK
Surround
back
to Tan R
L
to Green
SETUP
TUNING
ENTER
RE TURN
PRESET
MEMORY FM MODE A-FO RM LISTENING MODE MEMORY
SETUP/ENTER/
CH SEL/Cursor
/ / /
AUDIO SEL
/
LEVEL
PURE A
DIRECT
SURR
front panel, use the buttons corresponding to the ones on
the remote controller.
1
First, press the RCVR button and
then press the INPUT SELECTOR
button for the component con-
nected to the MULTI CH INPUT on
the rear of the TX-NR801/
TX-NR801E.
2
Press the SETUP button to display
the main menu on the monitor and
front display.
3
Use the
select "Input Setup" and then
press the ENTER button.
The "Input Setup" menu appears.
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
4
Use the
select "Multichannel Setup" and
then press the ENTER button.
The "Multichannel Setup" menu appears.
2-2.Multichannel Setup
a.Multichannel
5
Use the
"Yes" and then press the ENTER
button.
2-2.Multichannel Setup
a.Multichannel
6
Press the SETUP button to return
to the main menu.
and cursor buttons to
Input:DVD
[ENTER]Quit:[SETUP]
and cursor buttons to
Input:DVD
:No
Quit:[SETUP]
and buttons to select
Input:DVD
:Yes
Quit:[SETUP]