Setup Menu - Onkyo TX-NR801 Instruction Manual

Setup Menu

When making the various settings required to configure your TX-NR801/TX-NR801E for optimum performance, you
can either use the OSD Menu that appears on your television monitor or you can use the display on the front of the
TX-NR801/TX-NR801E. The OSD Menu is a settings menu that is displayed on your TV monitor. For your reference
when performing the setting procedures, this manual shows both the OSD Menu displayed on your television monitor
and the display on the front of the TX-NR801/TX-NR801E.
The Setup Menu consists of the Basic Menu that is divided up into 4 menus, the Hardware Setup Menu, the Speaker
Setup Menu, the Input Setup Menu, and the Audio Adjust Menu, and the Advanced Menu that contains the menus of
the Basic Menu, the Preference Menu, and the Network Setup Menu. These menus are then divided up into various sub-
menus, and these contain settings for you to optimize your home theater as you wish.
The display shown below is an example. The actual contents of your display may differ depending on the model of your
region and the selected input source.
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
→Advanced Menu
[ENTER]Quit:[SETUP]
Basic Menu
Your TX-NR801/TX-NR801E is
provided with a Basic Menu for
those who are not familiar with many
of the advanced settings of an AV
receiver or for those who wish to
watch movies and listen to music
with a minimal amount of setup.
With the Basic Menu, the settings
that rarely need to be set or that are
only needed for advanced fine-tuning
of the sound quality are not dis-
played.
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
→Basic Menu
[ENTER]Quit:[SETUP]
Advanced Menu
The Advanced Menu provides fea-
tures such as the Listening Mode
Presets that allow you to customize
the output sound for movies and
music just the way you like and the
AV Sync Setup that allows you to
adjust for discrepancies between the
video and audio timing.
28
Note:
The Hardware Setup Menu is accessible from the Basic
Menu at an initial setting. After being brought up on the
screen and setting any of its items, the menu is no longer
available from the Basic Menu.
In this case, you can gain access to the menu via the
" → Advanced Menu."
2.Input Setup
Input:DVD
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
6.Listening Mode Preset
[ENTER]Quit:[SETUP]
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
4.Delay
5.LFE Level
6.Mono
7.Theater-Dimensional
8.Surround
3.Audio Adjust
9.THX
10.Mono Movie
11.Enhance
12.Orchestra
13.Unplugged
14.Studio-Mix
15.TV Logic
Basic
Menu
30
32
36
37
38
52
53
54
54
55
→default
Advanced
Menu
64
56
57
62
72