Video And Audio; Net Audio - Onkyo TX-NR801 Instruction Manual

Troubleshooting Guide—Continued
Symptoms
Crackling noise on both
AM and FM stations.
Stereo indicator lights, but
sound is distorted and ste-
reo separation is bad.
Indicators for stereo recep-
tion flicker and hiss is
heard on FM stations.
No preset station is
recalled.
Desired picture does not
appear.
No OSD Menu display.
Audio and video do not
match.
Audio is not heard or audio
from different source is
heard.
No picture appears on the
TV screen (or monitor).
Pressing the NET AUDIO
button on the main unit (or
the NET A button on the
remote controller) fails to
activate the Internet radio
or music server feature.
The playback sound dis-
continues while using the
Music Server.
The unit fails to obtain a
station list from an Inter-
net radio site (via the XiVA
internet Radio Service).
Causes
Noise caused by fluorescent lamp being
turned on and off.
Noise from automobile ignition.
Station is too strong.
Multiple reflection of the radio waves
because of tall buildings or mountains.
Station is too weak.
Stereo FM broadcasts cover only about
half the distance of an ordinary broadcast.
Memory is lost because power has been
turned off for a long time.
Improper connection.
Video Setup Sub-menu settings are incor-
rect.
Improper connection.
Improper connection.
Video Setup Sub-menu settings are incor-
rect.
Digital Setup Sub-menu settings are
incorrect.
TV (or monitor) is not set to receive the
output signals from the receiver.
Video connection cable is not connected securely. Check connections (See pages 20 to 23).
Input source is connected to the COMPO-
NENT VIDEO IN connectors.
Imperfect network connection.
Excessive load on the network or server.
Or processor-intensive applications
including word processor and spreadsheet
are running.
The radio site is now out of service or oth-
erwise inaccessible due to some other rea-
son such as maintenance.
Remedies
Move antenna as far as possible from the fluores-
cent lamp.
Install an FM outdoor antenna as far as possible
from the road (See page 15).
Change the position or direction of the outdoor antenna.
Change to FM indoor antenna (See page 14).
Use antenna that has better directivity and orient it
so distortion decreases.
Install an outdoor FM antenna (See page 15).
Change the position or direction of the outdoor
antenna (See page 15).
Store all stations again (See page 47).
Check connections. Insert the plugs and connec-
tors completely (See pages 20 to 23).
Check settings at Setup Menu → Input Setup
Menu → Video Setup Sub-menu (See page 38).
Check connections (See pages 20 to 23).
Check connections (See pages 20 to 23).
Check settings at Setup Menu → Input Setup
Menu → Video Setup Sub-menu (See page 38).
Check settings at Setup Menu → Input Setup
Menu → Digital Setup Sub-menu (See page 36).
Set the TV (or monitor) to the receiver input.
Make sure TV (or monitor) is connected to COM-
PONENT VIDEO OUT connectors (See page 20).
Check the connection between this unit and the LAN
side port of your router (gateway) (See page 71).
Make sure that the modem and router (gateway)
are correctly connected. Also, make sure that the
power is on (See page 71).
Make sure that the Network Setup is configured
properly (See pages 72 to 74).
Make sure that your system satisfies all the system
requirements listed on page 70.
When you download or copy a large file on the PC,
the playback sound may discontinue. In such a
case, upgrade your PC to a higher performance
model or close unnecessary applications. And it is
recommended that you deploy a new server PC
dedicated to Net-Tune Central.
When you play WAVE files on multiple TX-NR801/
TX-NR801E, the playback sound may discontinue
because of network overload. In this case, deploying
another independent LAN dedicated to the Net
Audio to separate it from the general LAN connec-
tion, or adding a switching hub or router to improve
network traffic may resolve the problem.
Try to access the site again at a later time.
91