Procedure: Remove The Dummy Filter Module From The Passive Optical Shelf; Figure 9-2 Location Of The Dfm In The Passive Optical Shelf - Cisco ONS 15200 Handbook

Chapter 9 Dummy Filter Module
The Multichannel Unit (MCU) is energized with -48 VDC power.
Warning
Static electricity can damage electro-optical modules. While handling electro-optical modules, wear
Caution
a grounding wrist strap to discharge the static buildup. Wrist straps are designed to prevent static
electricity damage to equipment.

Procedure: Remove the Dummy Filter Module from the Passive Optical Shelf

Open the passive optical shelf cover.
Step 1
Push the button at the bottom of the DFM.
Step 2
Move the DFM upwards.
Step 3
Carefully slide it toward you.
Step 4
Remove the DFM from the passive optical shelf.
Step 5
Close the passive optical shelf cover.
Step 6
Figure 9-2
Passive
Optical Shelf
78-13767-01
Location of the DFM in the passive optical shelf
DFM Modules
A - Side
B - Side
LEGEND
DFM - Dummy Filter Module
00003565
Cisco ONS 15200 Module Handbook
Removing and Replacing a DFM
9-3