Chapter 4
Client Layer Interface Port Module
Figure 4-5
A B
NEBS - 3 compliant
Table 4-1
LED
Green
Yellow
Red
A and B
A and S
4.2 Technical Specifications
This section provides optical, electrical, environmental and mechanical specifications for the CLIP
module. Default thresholds are also included.
4.2.1 Optical Specifications
Table 4-2
78-13767-01
CLIP Indicators on the NAM front panel for MCU (left) and SCU (right)
A
S
CLIP LED Indicators (NAM and SCU)
Orientation
In line
Horizontal (2x2 pattern)
Vertical
lists optical operating frequencies.
A
CISCO ONS 15201
S
A B
M E T R O
D W D M
Condition (When Lit)
DC power to CLIP module
Minor alarm or warning
Critical or major alarm
Indicate the A and B sides of the
DWDM system
Indicate active (A) and standby
(S)
Note: The active side carries live
traffic and the standby side
provides a fail over path.
Cisco ONS 15200 Module Handbook
Technical Specifications
4-5