Removing and Replacing an NCB Module
Dispose of the battery and/or the NCB in an environmentally friendly way. Ultimate disposal
Warning
of the lithium battery and the NCB module must be handled according to all applicable
international, national, and local laws and regulations.
2.2.2 Environmental Specifications
Table 2-4
Table 2-4
Item
Normal operating temperature
Short term operating temperature
for equipment shelves
(per GR-63, NEBS level 3)
Rate of temperature change
Normal operating relative humidity
Short term operating relative humidity
(per GR-63, NEBS level 3)
2.2.3 Mechanical Specifications
Table 2-5
Table 2-5
Item
Height
Depth
Width
Weight
2.3 Removing and Replacing an NCB Module
This section explains how to remove and replace NCB modules.
Under normal circumstances, removing the NCB is non-service affecting.
Note
The NCB module is positioned in Slot 17 in the Cisco ONS 15252 Multichannel Unit (MCU) as shown
in
Figure
Cisco ONS 15200 Module Handbook
2-4
lists the normal climate-related limits.
NCB Environmental Specifications
lists physical dimensions.
NCB Module Physical Dimensions
Dimension
232 mm (9.1 in.)
215 mm (8.5 in.)
20 mm (0.8 in.)
0.38 kg (0.8 lbs.)
2-2.
Chapter 2
Specification
+5°C to +40°C (41°F to 104°F)
-5°C to +55°C (23°F to 131°F)
30°C/h (54°F/h)
5 to 85%, but not to exceed 0.024 kg water per kg dry air
5 to 90%, but not to exceed 0.024 kg water per kg dry air
Network Control Board Module
78-13767-01