Table of Contents
Advertisement
Chapter 4
Client Layer Interface Port Module
Table 4-3
Function
3R
2R/3R
The 2R function retransmits the optical signal with electrical regeneration and reshaping but without
Note
retiming. The 3R function regenerates, reshapes, and retimes the optical signal.
4.2.2 Electrical Specifications
At maximum operating temperature and input voltage, the CLIP module consumes 8 watts at most.
4.2.3 Environmental Specifications
Temperature and current characteristics for the CLIP module are listed in the next six tables. The bias
currents specified are at calibration time.
Table 4-4
Threshold
High alarm
High warning 80%
Low warning
Low alarm
Table 4-5
Threshold
High alarm
High warning
Low warning
Low alarm
78-13767-01
CLIP Versions
Dispersion
tolerance
1800 ps/nm
3000 ps/nm
CLIP Peltier Current
Percentage of
maximum current
95%
–80%
–95%
CLIP Board Temperature
Degrees Celsius
80
70
10
0
DWDM side
optical output power
range/short form
+7 dBm
long/L
0 dBm
very long/V (with
external amplifier)
Cisco ONS 15200 Module Handbook
Technical Specifications
4-7
Advertisement
Table of Contents
