Procedure: Remove The Network Control Board; Figure 2-2 Mounting An Ncb Module - Cisco ONS 15200 Handbook

Chapter 2 Network Control Board Module
Figure 2-2

Procedure: Remove the Network Control Board

Back up all NCB files to a laptop or PC as described in the Cisco 15200 Command Line Interface Manual
Step 1
and in the
Disconnect the front panel Ethernet cable from the NCB module.
Step 2
Loosen the thumbscrews.
Step 3
Note
Carefully remove the NCB module from the ONS 15252 MCU.
Step 4
78-13767-01
Mounting an NCB module
"Back up Files from the Network Control Board" procedure on page
The NCB module screws are equipped with retainers.
Removing and Replacing an NCB Module
2-7.
Cisco ONS 15200 Module Handbook
2-5