Technical Specifications
The CMY is passive and does not include alarm or supervisory subunit functions.
Note
CMY module connectors include an input optical fiber duplex adapter (MU) and an output MU
Note
duplex connector.
13.2 Technical Specifications
This section provides environmental and mechanical specifications for the CMY module. The CMY
module is a passive device; therefore, optical and electrical specifications, as well as default thresholds,
do not apply.
13.2.1 Environmental Specifications
Table 13-1
Table 13-1 CMY Module Environmental Specifications
Item
Normal operating temperature
Short term operating temperature
for equipment shelves
(per GR-63, NEBS level 3)
Rate of temperature change
Normal operating relative humidity
Short term operating relative humidity
(per GR-63, NEBS level 3)
13.2.2 Mechanical Specifications
The CMY module consists of the following parts:
•
•
•
•
•
The CMY module uses two 5.0 m (16.40 feet) SMF patch cords.
mechanical specifications.
Cisco ONS 15200 Module Handbook
13-2
lists environmental specifications for the CMY module during operating conditions.
Two 2.0-mm diameter SMF patch cords with optical fiber connectors (type MU)
One HFM housing
One MU/MU duplex adapter
One MU/MU duplex connector housing
Two dust plugs to be removed at installation
Specification
+5°C to +40°C (41°F to 104°F)
-5°C to +55°C (23°F to 131°F)
30°C/h (54°F/h)
5 to 85%, but not to exceed 0.024 kg water per kg dry air
5 to 90%, but not to exceed 0.024 kg water per kg dry air
Table 13-2
Chapter 13
Connection Module Y
lists CMY module
78-13767-01