Specifications - Cisco LightStream 1010 Configuration Note

Atm switch processor module
Hide thumbs Also See for LightStream 1010:
Table of Contents

Advertisement

Supporting such capabilities on the field-replaceable feature card allows you to upgrade the
LightStream 1010 in the field as and when such standards evolve and more advanced mechanisms
are required.
Note
module.
Specifications
Table 3 lists the ATM switch processor specifications:
Table 3
Description
Switch and processor
capacity
Software images
Dimensions (H x W x D)
Weight
Operating temperature
Nonoperating temperature
Humidity
Altitude
Microprocessor
Memory
Interface timing
ATM Switch Processor
(ASP)
Management access
ASP Interface ports
Network management
Mean Time Between
Failures
Maximum
station-to-station cabling
distance
Agency approvals
1. Gbps = gigabits per second
When you upgrade the feature card you must power down the switch and remove the ASP
ATM Switch Processor Module Specifications
Specifications
5 Gbps
65,536 cells of ATM cell buffers
Default image with IISP protocol
Optional PNNI image with plug-and-play capacity
1.2 x 14.4 x 16 in.(3.0 x 36.6 x 40.6 cm)
6.85 lb (3.09 kg)
32 to 104F (0 to 40C)
-40 to 67F (-40 to 75C)
10 to 90%, noncondensing
-500 to 10,000 ft (-52 to 3,048 m)
100-MHz MIPs R4600
8 MB of Flash memory (upgradeable to 16 MB)
16 MB of packet-buffer DRAM
256 KB of boot EPROM
128 KB of SRAM
Loop timing, Stratum 4 accuracy clock for self-timing, master clock distribution port
ASP module, 16 MB DRAM, 8 MB Flash memory, No Flash card installed
WATM-ASP1
Standard Ethernet and dual EIA/TIA 232 serial ports on ASP module
RJ-45 IEEE 802.3 Ethernet 10BaseT port, 25-pin EIA/TIA-232
DB-25 console port for an administration workstation
Port Tx and Rx LEDs, switch and common equipment status LEDs
5.8 years for ASP and Feature card
10BaseT Ethernet—Category 3-5 UTP
Safety: UL
8
EMI
: FCC Class A
CE Mark, and VCCI Class II with shielded cables
1
shared memory, nonblocking switch fabric
2
standard (upgradeable to 64 MB)
3
6
7
1950, CSA
-C22.2 No. 950-93, and EN60950
LightStream 1010 ATM Switch Processor Module Configuration Note
4
AUX port, and a
5
: 328 ft. (100 m)
ASP Description
7

Advertisement

Table of Contents
loading

Table of Contents