Table of Contents
Advertisement
Chapter 5
5.1 Introduction
The board has an onboard Intel 855GME chipset for its AGP/SVGA con-
troller. It supports LVDS LCD displays and conventional analog CRT
monitors with 64MB frame buffer shared with system memory. The VGA
controller can drive CRT displays with resolutions up to 1600 x 1200 @
85 Hz and 2048 x 536 @ 75 Hz and support 2 channel LVDS display
mode up to UXGA panel resolution with frequency range from 25 MHz
to 112 MHz.
5.1.1
CMOS setting for panel type
The PCM-4380 system BIOS and custom drivers are located in a 512
Kbyte, Flash ROM device, designated U29. A single Flash chip holds the
system BIOS, VGA BIOS and network Boot ROM image. The display
can be configured via CMOS settings. This method minimized the num-
ber of chips and different type of LCD panels, please choose "panel type"
from the "integrated peripherals" menu in CMOS setting.
5.1.2
Display type
The PCM-4380 can be set in one of three configurations: on a CRT, on a
flat panel display, or on both dual independent display. The system is ini-
tially set to dual display mode. If you want to enable the CRT display
only or the flat panel display only, please contact Intel Corporation or our
sales representative for detailed information.
5.1.3
Dual Independent Display
The PCM-4380F uses a Intel 855GME controller that is capable of pro-
viding multiple views and simultaneous display with mixed video and
graphics on a flat panel and CRT.
To set up dual display under Windows 2000/XP follow these steps:
PCM-4380 User Manual
PCI SVGA/LCD Setup
40
Advertisement
Table of Contents
