Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual page 167

Settings
Control settings
External interfaces
Dual pump management
Fig. 48: Dual pump management menu
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Universal
1.0
1.4
1.4.1
1.4.1.1
1.4.1.2
Confirm (Pump will reset!) Confirm
Double pump pairing
status
Pairing in progress...
Pairing successful.
Pairing failed.
Reset will follow.
Partner not found.
Partner already paired.
Partner incompatible.
Partner Node-ID:
Cancel
1.4.2
Confirm (Pump might re-
set!)
1.4.3
1.4.3.1
1.4.3.2
1.4.4
1.4.4.1
1.4.4.2
1.4.4.3
Confirm
Cancel
1.4.5
1.4.5 / 1
1.4.5 / 2
1.4.5 / 3
The following settings are possible with no existing twin-head pump connection:
• Twin-head pump connection.
• Pump housing type
The following settings are possible with an existing twin-head pump connection:
• Disconnect twin-head pump.
• Twin-head pump function
• Set pump cycling.
• Pump housing type
NOTICE
With a factory-supplied twin-head pump, the twin-head pump connec-
tion is pre-configured and active.
Display text
Settings
Dual pump management
Connecting twin-head pump
Twin-head pump partner address
Establish twin-head pump connection
(pump will reset!)
Twin-head pump pairing status
Pairing in progress...
Pairing successful
Pairing failed
Reset will follow
Partner not found
Partner already paired
Partner incompatible
Partner node ID:
Cancel
Disconnecting twin-head pump
Confirm
(Pump might reset!)
Twin-head pump function
Main/reserve
Peak-load operation
Pump cycling
Time-based pump cycling: ON/OFF
Time-based pump cycling: Interval
Manual pump cycling
Confirm
Cancel
Pump housing type
Single pump
Twin-head pump (left):
Twin-head pump (right):
en
167