Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual page 155

Language
UNIV
FI
SV
Fig. 29: Menu language
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Language abbreviations
SL
HR
SK
SR
LT
LV
ET
RU
UK
BG
EL
TR
Table 16: Menu languages
NOTICE
In addition to the languages, there is a neutral number code "Universal" in
the display that can be selected as an alternative language. The number
code is listed and explained in tables next to the display texts.
Factory setting: English
NOTICE
After selecting a language other than the one currently set, the display
may switch off and restart.
The green LED flashes during this process. After the display has restarted,
the language selection list opens with the activated newly selected lan-
guage.
This process can take up to approx. 30 sec.
After selecting the language, the initial setting menu is exited. The display changes to the
main menu.
If no settings are made, the pump starts in factory setting (Δp-v).
For further factory settings, see "Factory setting" [" 198] section.
NOTICE
The factory setting for variant ... R1 (without differential pressure sensor in
delivery status) is the basic control mode "Constant speed". The factory
setting mentioned below refers to the variant with a differential pressure
sensor fitted in the factory.
Language
Slovenian
Croatian
Slovak
Serbian
Latvian
Lithuanian
Estonian
Russian
Ukrainian
Bulgarian
Greek
Turkish
en
155