Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual page 156

en
9.4.4 Main menu
n-c
Setpoint
P electr = 4 W
Fig. 30: Main menu
9.4.5 Main menu "Home screen"
156
Meaning of the main menu symbols in the display
Universal
Homescreen
1.0
2.0
3.0
The selection of the home screen
"House" symbol.
Fig. 31: Home screen
Item Name
1 Main menu over-
view
1.1 Status area:
Error, warning or
process information
display
2 Title bar
3 Setpoint display
field
4 Setpoint editor
5 Active influences
6 Operating data and
measurement area
Table 17: Home screen
Setpoints can be changed in the "Home screen" menu.
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Display text
Homescreen
Settings
Diagnostics and measured values
Factory setting
is done by turning the operating button to the
Explanation
Selection of different main menus
Indicates an on-going process, warning or error message.
Blue: Process or communication status display (CIF module
communication)
Yellow: Warning
Red: Fault
Grey: There are no processes running in the background,
there are no warning or error messages.
Display of the currently set control mode.
Displays currently configured setpoints.
Yellow frame: You have pressed the operating button to
open the setpoint editor and change the value.
Display of influences on set control mode,
E.g. EXT. OFF. Up to four active influences can be displayed.
If a twin-head pump connection is set up, the status of the
twin-head pump is displayed here.
Shows current operating data and measured values. The
displayed operating data depend on the set control mode.
They are displayed alternately.