Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual page 154

en
9.4.3 Initial settings menu
Language
EN
DE
FR
Fig. 28: Initial settings menu
154
Control settings
Control mode
Setpoint Δp-v
Emergency operation
• Turn : menu selection and parameter setting.
• Press : Activation of menus or confirming settings.
Press the "Back" button
the focus back to the previous focus. Consequently, the focus moves one level further up in
the structure or to a previous setting.
Pressing the Back button
firming the changed value returns the focus to the previous focus. The adjusted value will
be discarded. The previous value remains unchanged.
If the Back button is pressed for more than 2 seconds, the Home screen opens and the
pump can be operated from the main menu.
NOTICE
If there are no warning or error messages, the display on the electronic
module will switch off 2 minutes after the last time it was operated.
• If the operating button is pressed or turned again within 7 minutes, the
previously exited menu will appear. You can continue to configure set-
tings.
• If the operating button is not pressed or turned for more than
7 minutes, any unconfirmed settings will be lost. Pressing the button
again opens the Home screen on the display and the pump can be oper-
ated from the main menu.
The settings menu will appear in the display during initial commissioning of the pump.
Turn the operating button to display the different menu languages. The following languages
can be selected:
Language abbreviations
EN
DE
FR
IT
ES
UNIV
FI
SV
PT
NO
NL
DA
PL
HU
CS
RO
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
("Description of operating elements" [" 153] table) to change
after having changed a setting (yellow focus) without con-
Language
English
German
French
Italian
Spanish
Universal
Finnish
Swedish
Portuguese
Norwegian
Dutch
Danish
Polish
Hungarian
Czech
Romanian
Control mode
Δp-v
Δp-c
n-c