Turning Off The Computer - Epson ActionPC 5000 User Manual

Now you need to run the SETUP program to make sure your
computer is configured properly. First turn off the computer, as
described below, then see Chapter 2 for instructions. When you
finish running SETUP, see "Post-SETUP Procedures" on page
2-16 for guidelines on what to do next.

Turning Off the Computer

Whenever you turn off your system, follow these steps:
1. Save your data and exit any application programs.
2.
Check the hard disk drive light and the diskette drive light(s)
to make sure they are not on. Don't turn off the computer if
the light is on, because you can damage the drive or lose
data.
3. Remove any diskette(s) from the diskette drive(s).
4.
Press the power button to turn off the computer.
5.
Turn off the monitor, printer, and any other peripheral
devices.
1-10 Setting Up Your System