Turning On The Computer - Epson Equity 386/33 PLUS Setup Manual

Turning On the Computer

8
After you set up your system, you're ready to turn on the
power. But first, read the following safety rules to avoid
accidentally damaging your computer or injuring yourself:
(including the mouse or keyboard) or power cables when
the computer's power is on.
diskette drive.
light is on. This can destroy data stored on the disk.
power before you turn it on again. This allows the
computer to clear and reset its memory.
can damage the circuitry of your equipment.
power cord, and wait 30 seconds before you remove the
cover. Only remove the cover to access internal devices.
Follow these steps to turn on your system:
1. Turn your computer around so the front panel faces you and
place your other system components in a convenient
arrangement.
2. Turn on the monitor, printer, and any other peripheral
devices connected to the computer.
3. To turn on the computer, press the power button located on
the right side of the front panel, as shown in the following
illustration.
Setting Up Your System
1-16