Installing An Option Card - Epson ActionPC 5000 User Manual

5. Follow the same procedure to remove any other SIMMs.
6. If you are inserting different SIMMs, follow the instructions
on page 4-13 to install them.
7. Replace any option cards you removed, as described below.

Installing an Option Card

This section explains how to install option cards in your
computer. Your computer has five 16-bit slots, three full-length
and two half-length. Two of the full-length slots are VESA
compatible.
Before you install any option cards in your system, make
As you install option cards, keep these guidelines in mind:
slots with the extra VESA connectors. If you have an 8-bit
card, you can install it in a 16-bit slot, as long as it fits.
before deciding which slot to use. Make sure that no
components are touching or obstructing other cards or
cables.
components on the circuit board or the gold-edged
connectors. If you need to set it down before you install it,
place it gently on top of its original packing material with
the component side facing up. Keep the packing materials
in case you remove the card later.
4-16
Installing and Removing Options