Diskette Drive Problems; Hard Disk Drive Problems - Epson ActionPC 5000 User Manual

Diskette Drive Problems

A newly installed diskette drive is not working properly.
Make sure you have installed the drive correctly and check all
the cable connections.
You see a diskette drive error when you start your computer.
Run the SETUP program and configure your system for the
correct type of diskette drive. Also check the jumper setting of
J6 to make sure the diskette drive controller is enabled.
The diskette drive is making bud or unusual noises.
Contact your Authorized EPSON Servicer.

Hard Disk Drive Problems

A new/y installed hard disk drive is not working proper/y or
its performance is not what you expect.
Make sure you have installed the drive correctly and check all
cable corrections. Also, check the jumper settings on your
drive.
Check that you have installed the IDE driver on your hard disk
(see Chapter 2). To take advantage of the local bus IDE
interface, your hard disk drive must support a 32-bit data path
that uses double-word I/O. Also make sure your CONFIG.SYS
file is loading the IDE driver when you start your system.
Some hard disk drives do not support the Energy Star features
on your system. You may need to disable these features in
SETUP.
6-8 Troubleshooting