How To Use This Manual - Epson ActionPC 5000 User Manual

How to Use This Manual

This manual contains the information you need to get the best
results from your computer. You don't have to read everything
in this book; see the following chapter summaries to find the
sections you need.
Chapter 1 provides instructions for setting up your system and
connecting peripheral devices such as the monitor and printer.
Chapter 2 describes how to run the SETUP program to
define your computer's configuration. You may need to do
this the first time you use your computer. If you change the
configuration later, you will need to run it again. This chapter
also describes how to install the IDE driver that allows you to
take advantage of your hard disk drive's local bus capabilities.
Chapter 3 covers general operating procedures, such as
resetting the computer, using the password, and changing the
processor speed.
Chapter 4 describes how to remove and replace the computer's
cover, change jumper settings, and install optional equipment
such as microprocessor upgrades, option cards, and memory
modules.
Chapter 5 explains how to install and remove disk drives.
Chapter 6 contains troubleshooting tips.
The Appendix lists the specifications of your computer and the
operating environments that have been tested on your system.
At the end of this manual you'll find a Glossary, an Index, and
a list of international marketing locations.
6 Introduction