Epson ActionPC 5000 User Manual page 79

Note
If your socket has a basket-type handle, lift the handle
straight up to release the microprocessor.
5. Gently pull the microprocessor straight up and set it aside.
(Store the chip in the packaging included with your new
microprocessor, in case you need to reinstall it later.)
6. Remove the replacement chip from its package and inspect
the pins. If they are bent, do not install the microprocessor
chip. Contact your vendor for a new one.
7. Position the microprocessor over the socket, aligning the
notched edge on the chip (marked with a dot) with the
extra hole on the socket, as shown below.
If you install the microprocessor chip in the wrong
Installing and Removing Options
4-26