Removing The 4 X 2.5-Inch Rear Drive Module Air Shroud; Installing The 4 X 2.5-Inch Rear Drive Module Air Shroud - Dell PowerEdge R7625 Installation And Service Manual

Removing the 4 x 2.5-inch rear drive module air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
Press the edges and lift the air shroud out of the rear drive module.
Figure 41. Removing the 4 x 2.5-inch rear drive module air shroud
Next steps
1. Replace the 4 x 2.5-inch rear drive module air

Installing the 4 x 2.5-inch rear drive module air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the tabs on the air shroud with the slots on the rear drive module.
2. Lower the air shroud into the rear drive module until it is firmly seated.
82 Installing and removing system components
Safety instructions.
Before working inside your
shroud.
Safety instructions.
Before working inside your
system.
system.