Figure 148. Removing expansion card from the expansion card riser
4. If the expansion card is not going to be replaced, install a filler bracket and close the card retention latch.
Figure 149. Installing the filler bracket
Next steps
1. If applicable,
install an expansion card into the expansion card
Installing an expansion card into the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installing a new expansion card, unpack it and prepare the card for installation.
NOTE:
For instructions, see the documentation accompanying the card.
Steps
1. Pull and lift up the expansion card retention latch lock to open.
192
Installing and removing system components
Safety
instructions.
Before working inside your
riser.
system.