Table of Contents
Advertisement
Figure 88. C4-1: 16 x 2.5-inch SAS4/SATA RAID-SmartFlow (w/ FPERC11)
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 86. 16 x 2.5-inch SAS4/SATA RAID-SmartFlow (w/ FPERC11)
Order
1
2
3
4
From
SL1_CPU2_PA4 (signal connector on system
board)
SIG_PWR_1 (system board power connector)
CTRL_SRC_SB1 (fPERC controller connector)
SIG_PWR_2 (system board power connector)
To
CTRL_DST_PA1 (fPERC input
connector)
BP_PWR_1 (backplane power
connector)
BP_DST_SA1 (backplane signal
connector)
BP_PWR_1 (backplane power
connector)
Installing and removing system components
121
Advertisement
Table of Contents
