Table of Contents
Advertisement
Figure 86. C3-2: 8 x U.2 G4 RAID (w/ FPERC11 N)
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 84. 8 x U.2 G4 RAID (w/ FPERC11 N)
Order
1
2
3
4
From
SL5_CPU1_PB2 (signal connector on system
board)
SIG_PWR_1 (system board power connector)
CTRL_SRC_PB1 (fPERC controller connector)
CTRL_SRC_PA1 (fPERC controller connector)
To
CTRL_DST_PA1 (fPERC input
connector)
BP_PWR_1 (backplane power
connector)
DST_PA2 (backplane signal connector)
and DST_PB2 (backplane signal
connector)
DST_PA1 (backplane signal connector)
and DST_PB1 (backplane signal
connector)
Installing and removing system components
119
Advertisement
Table of Contents
