Table of Contents
Advertisement
Figure 98. C7-5: 24 x 2.5-inch SAS4/SATA (w/ FPERC11) w/ 2 x 2.5-inch
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 96. 24 x 2.5-inch SAS4/SATA (w/ FPERC11) w/ 2 x 2.5-inch
Order
From
1
SIG_PWR_1 (system board power connector)
2
SL3_CPU1_PA1 (signal connector on system board)
3
CTRL_SRC_SB1 (fPERC controller connector)
4
CTRL_SRC_SA1 (fPERC controller connector)
5
SIG_PWR_2 (system board power connector)
6
BP_SRC_SA2 (backplane expander signal connector) BP_DST_SA1 (rear backplane signal connector) and
7
SIG_PWR_0 (system board power connector)
To
BP_PWR_1 (backplane power connector)
CTRL_DST_PA1 (fPERC input connector)
BP_DST_SB1 (backplane expander signal connector)
BP_DST_SA1 (backplane expander signal connector)
BP_PWR_2 (backplane power connector)
BP_DST_SB1 (rear backplane signal connector)
BP_PWR_1 (rear backplane power connector)
Installing and removing system components
131
Advertisement
Table of Contents
