Figure 109. Installing the Adapter PERC module
Next steps
1. Connect the cables to the Adapter PERC module and route the cables properly.
NOTE:
Refer
cable routing
2.
Install the cooling fan cage
3. If removed,
install the air shroud
4.
Install the drive backplane
5.
Install the expansion card
6. Follow the procedure listed in
System memory
System memory guidelines
The PowerEdge R7625 system supports DDR5 registered DIMMs (RDIMMs).
Your system memory is organized into twelve channels per processor (one memory sockets per channel),12 memory sockets per
processor and 24 memory sockets per system.
topic for more information.
assembly.
or
install the GPU air
cover.
riser.
After working inside your
shroud.
system.
Installing and removing system components
141