Installing A Power Supply Unit - Dell PowerEdge R7625 Installation And Service Manual

Figure 194. Removing a power supply unit
Next steps
1. Replace the PSU or install the PSU

Installing a power supply unit

Prerequisites
1. Follow the safety guidelines listed in the
2. For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum
output power.
NOTE: The maximum output power (shown in watts) is listed on the PSU label.
3. Remove the PSU blank.
Steps
Slide the PSU into the PSU bay until the release latch snaps into place.
blank.
Safety instructions.
Installing and removing system components 225