Dell PowerEdge R7625 Installation And Service Manual page 52

Table 56. HTTP Device n Settings details (continued)
Option
VLAN
VLAN ID
VLAN Priority
DHCP
IP Address
Subnet Mask
Gateway
DNS info via DHCP
Primary DNS
Secondary DNS
URI (will obtain from
DHCP server if not
specified)
TLS Authentication
Configuration
Table 57. UEFI ISCSI Settings screen details
Option
ISCSI Initiator Name
ISCSI Device1
ISCSI Device1 Settings
Table 58. ISCSI Device1 Settings screen details
Option
Connection 1
Connection 2
Connection 1 Settings
Connection 2 Settings
Connection Order
Table 59. UEFI NVMe-oF Settings screen details
Option
NVMe-oF
NVMe-oF Host NQN
NVMe-oF Host Id
Host Security Key Path
NVMe-oF SubSystem Settings
52 Pre-operating system management applications
Description
Prefix Length: IPv6 Prefix Length (0-128) for this HTTP Device.
Enables VLAN for HTTP device. This option is set to Enable or Disable. This option is set to
Disable by default.
Shows the VLAN ID for the HTTP device
Shows the VLAN Priority for the HTTP device.
Enables or disables DHCP for this HTTP device. This option is set to Enable by default.
Specifies IP address for the HTTP device.
Specifies subnet mask for the HTTP device.
Specifies gateway for the HTTP device.
Enables or disables DNS Information from DHCP. This option is set to Enable by default.
Specifies the primary DNS server IP address for the HTTP Device.
Specifies the secondary DNS server IP address for the HTTP Device.
The URI will be obtained from the DHCP server if not specified.
View and/or modify this device's boot TLS authentication configuration.
Description
Specifies the name of the ISCSI initiator in IQN format.
Enables or disables the ISCSI device. When disabled, a UEFI boot option is created for
the ISCSI device automatically. This is set to Disabled by default.
Enables you to control the configuration of the ISCSI device.
Description
Enables or disables the ISCSI connection. This option is set to Disable by default.
Enables or disables the ISCSI connection. This option is set to Disable by default.
Enables you to control the configuration for the ISCSI connection.
Enables you to control the configuration for the ISCSI connection.
Enables you to control the order for which the ISCSI connections will be
attempted.
Description
Enables or disables the NVMe-oF device. When disabled, a UEFI boot option is created
for the NVMe-oF device automatically. This is set to Disabled by default.
Specifies Host NQN of the NVMe-oF device.
Specifies Host Id of the NVMe-oF device.
Specifies Host Security Key Path of the NVMe-oF device.
Enables you to control the configuration of the NVMe-oF device.