Table of Contents
Advertisement
Figure 50. Installing a 4 x 2.5-inch rear drive module cooling fan
Next steps
1.
Install the 4 x 2.5-inch rear drive module air
2. Follow the procedure listed in
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Figure 51. Removing a drive blank
Next steps
1.
Replace the drive
blank.
90
Installing and removing system components
shroud.
After working inside your
Safety
instructions.
bezel.
system.
Advertisement
Table of Contents
