Idrac Quick Sync 2 Indicator Codes - Dell PowerEdge R7625 Installation And Service Manual

Table 127. System health and system ID indicator codes
System health and system ID
indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber

iDRAC Quick Sync 2 indicator codes

iDRAC Quick Sync 2 module (optional) is located on the left control panel of the system.
Table 128. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly and then
powers off
Solid amber
Blinking amber
244 System diagnostics and indicator codes
Condition
Indicates that the system is powered on, is healthy, and system ID mode is not active.
Press the system health and system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health and system ID
button to switch to system health mode.
Indicates that the system is in fail-safe mode.If the problem persists, see the
help section.
Indicates that the system is experiencing a fault. Check the System Event Log
for specific error messages. For information about the event and error messages
generated by the system firmware and agents that monitor system components, go
to qrl.dell.com > Look Up > Error Code, type the error code, and then click Look it
up.
Condition
Indicates that the iDRAC Quick Sync 2
feature is powered off. Press the iDRAC
Quick Sync 2 button to power on the
iDRAC Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to power off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Corrective action
If the LED fails to power on, reseat the
left control panel flex cable and check.
If the problem persists, see the
help section.
If the LED fails to power off, restart the
system. If the problem persists, see the
Getting help section.
If the indicator continues to blink
indefinitely, see the Getting help
If the indicator continues to blink
indefinitely, see the Getting help
Check if iDRAC Quick Sync 2 feature
is configured to be disabled by
iDRAC. If the problem persists, see
the Getting help section.
poweredgemanuals or Dell OpenManage
Server Administrator User's Guide at
www.dell.com/openmanagemanuals.
Restart the system. If the problem
persists, see the Getting help
Restart the system. If the problem
persists, see the Getting help
Getting
Getting
section.
section.
www.dell.com/
section.
section.