Table of Contents
Advertisement
3. If installed,
remove the air
WARNING:
The memory modules are hot to touch for some time after the system has been powered off. Allow
the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid
touching the components or metallic contacts on the memory module.
Steps
1. Locate the appropriate memory module socket.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
3. Lift the memory module away from the system.
Figure 111. Removing a memory module
Next steps
1.
Replace the memory
module, if you are removing a memory module permanently, install a memory module blank.
NOTE:
The procedure to install a memory module blank is similar to the procedure to install a memory module.
NOTE:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not
occupied. The memory module blanks compatible with the R7625 are DDR5 gray color blanks. Remove the memory module
blanks only if you intend to install memory modules in those sockets.
Installing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installed,
remove the air
4. If installed, remove a memory module blank.
NOTE:
The procedure to remove a memory module blank is similar to the procedure to remove a memory module.
NOTE:
Retain the removed memory module blank(s) for future use.
144
Installing and removing system components
shroud.
Safety
instructions.
Before working inside your
shroud.
system.
Advertisement
Table of Contents
