Replacing The Paper Cutter Blade; Removing The Old Blade - Epson Stylus Pro 7880 User Manual

Caution: Do not try to
slide the carriage by
hand, or you may damage
the printer.
Maintaining and Transporting the Printer
To check the ink cartridges, press d to highlight
•
then press
Menu
to view the information.
4. To exit maintenance mode, turn off the printer by pressing the P Power
button. Press the P Power button again to turn on the printer in the
normal operating mode.

Replacing the Paper Cutter Blade

If you notice that your paper isn't being cut cleanly, the cutter blade may
need to be replaced. If you use the blade to cut heavy stock, you will damage
the blade and need to replace it. See page 56 for a list of media that do not
work with the cutter.
You can check the status of your cutter by printing the status check sheet or
viewing its status on the control panel. See page 132 for instructions.
You can obtain a new cutter blade from Epson (part number C12C815291).
See page 12 for ordering details.

Removing the Old Blade

Make sure the printer is turned on, then follow these steps to remove the
blade:
1. Press the button.
Menu
2. Press d until
MAINTENANCE
3.
CUTTER REPLACEMENT
4. Press . The print head moves to the replacement position.
FRONT COVER TO SEE CUTTER REPLACEMENT LABEL
displayed.
151
. Press d to select each cartridge, then press
is highlighted, then press
is highlighted. Press
| 151
INK INFO MENU
Menu
Menu.
again.
Menu
OPEN
is
,