62
|
Handling Paper and Other Media
3. Press the
button. The printer automatically feeds the paper to the
cutter guide.
4. If necessary, adjust the cutting position by pressing the u or d Paper
Feed buttons.
5. Press the l Paper Source button until you see the
On) icon on the LCD.
6. Press and hold the
Printing Trim Lines
You can print trim lines on the right edge of your pages (Auto Cut On) or
on the right and bottom edge (Auto Cut Off).
1. Press the
button.
Menu
2. Press the
button again to select the Printer Setup menu and
Menu
highlight
PLATEN GAP
3. Press the d button to highlight
4. Press the
button.
Menu
5. Press the d or u button to highlight
6. Press the
button to save the setting. An asterisk appears next to
7. Press the
Pause button to exit the menu.
You can also specify trim lines from your printer driver software. For
instructions, see page 89 (Mac OS X) or page 106 (Windows).
button for 3 seconds. The paper is cut.
.
PAGE LINE
ON
62
roll (Auto Cut
.
.
.
ON