56
|
Handling Paper and Other Media
Choose
if you want the paper to be cut automatically after each
•
page is printed.
Do not leave roll paper loaded in the printer when it is not in use.
•
Choose
if you want to print a series of pages and keep them together
•
for cutting later on.
Choose
if you're printing on canvas or other heavy media. Media
•
that is too thick may damage the cutter. Use of Epson's optional Manual
Media Cutting System is recommended. See page 12 for more
information.
The following media (and other similar materials) may not work with
the built-in cutter:
Fine art paper (including Epson Textured and UltraSmooth
•
Art Paper)
PremierArt
•
TM
Vinyl
•
Matte board
•
Backlight film
•
Heavyweight polyester banner media
•
DuPont
Semigloss Proofing Paper
•
TM
If you're loading heavy paper, you may need to increase the paper
•
suction by pressing the u Paper Feed button. For lightweight paper,
decrease the suction by pressing the d Paper Feed button. (Release the
paper lever to adjust the suction, then secure it again.)
Water Resistant Canvas for Epson
56
Fine
®