Epson Stylus Pro 7880 User Manual page 167

Message
MAINT TANK FULL
REPLACE THE
MAINTENANCE TANK
MISMATCH ERROR
MAKE SURE THAT THE
INK CARTRIDGE AND
DRIVER SETTINGS
MATCH
NO CARTRIDGE
INSTALL INK CARTRIDGE
NO MAINTENANCE TANK
INSTALL THE
MAINTENANCE TANK
PAPER CUT ERROR
REMOVE UNCUT PAPER
PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
PAPER ERROR
LOAD PAPER PROPERLY
PAPER LOW
PAPER JAM
REMOVE PAPER
PAPER OUT
LOAD PAPER
PAPER SETTING ERROR
LOAD CUT SHEET PAPER
Explanation
The maintenance tank is full.
The black ink cartridge option
does not match what is
selected in the driver
A non-Epson ink cartridge is
installed.
Ink cartridge(s) not installed.
Maintenance tank is not
installed.
Roll paper was not cut
correctly.
The cutter may be blunt or
incorrectly installed.
Paper remains in the printer.
Printer cannot detect paper.
The paper roll is almost
finished.
Paper has jammed in the
printer.
Paper ran out.
The paper path is wrong.
Response
Replace the maintenance tank. For the
Pro 9880, note which tank is full; see page 154.
Stop printing, and then press and hold the
Pause button for 3 seconds. Select the
correct black ink cartridge option in the driver;
see page 148. If you want to continue printing,
press the Pause button.
Press and hold the
3 seconds to cancel printing. If you want to
continue printing, press the
Install ink cartridge(s); see page 141.
Make sure the maintenance tank is fully
inserted. For the Pro 9880, note which tank is
missing; see page 154.
Release the paper lever and finish cutting the
paper. Reload paper if necessary.
Reinstall or replace the cutter blade if
necessary; see page 151.
Release the paper lever and remove the paper.
If you are using cut sheets, make sure the
paper is flat. If you are using roll paper, make
sure the roll is cut evenly.
Release the paper lever and reload paper.
Replace the roll paper.
Release the paper lever and remove the
jammed paper. Turn the printer off and then
back on; see page 176 for more information.
Load paper.
Load cut sheet paper, as described on page 63.
Press the l Paper Source button until the
Sheet icon appears on the LCD display.
167
Solving Problems
Pause button for
Pause button.
| 167