Note: You can use the
PRINTER SETUP menu to
enable the roll paper
counter, paper size
check, and several other
printer features. For more
information, see
page 206.
Maintaining and Transporting the Printer
Changing the Date and Time
1. Press the
button.
Menu
2. Press d until
MAINTENANCE
3. Press d until you see
4. Use the d, u, and
displayed in the following format:
5. Press
to save the setting.
Using Maintenance Mode
Maintenance mode allows you to make special settings and perform
maintenance procedures that may be needed occasionally. You can use
maintenance mode to do the following:
Print a hex dump for diagnosing problems
•
Change the language or units of measurements used on the printer's
•
control panel menus
Enable the printable pages counter
•
Change the default pressure setting for the automatic cutter
•
Run a "super strong" cleaning cycle.
•
Track the amount of roll paper remaining
•
Enable power on roll paper feed
•
Return all of the printer's control panel settings to their default values
•
Check ink information
•
149
is highlighted, then press
, then press
CLOCK SETTING
buttons to set each item in the date and time,
Menu
MM/DD/YY HH:MM
|
149
.
Menu
Menu
.
.