14
|
Introduction
Caution: Using an
improperly shielded
cable—especially a cable
more than 10 feet (6 m)
long—may cause the
printer to malfunction.
Note: USB 2.0 is
required to run the
printer at full speed.
For USB connection: a compliant USB Hi-Speed 2.0 port and a
•
shielded USB "AB" cable from Series A (computer) to Series B (printer),
up to 10 feet (6 m) long
For network connection: Ethernet-equipped Macintosh and a
•
Category 6 compatible cable
Windows System Requirements
To use your printer in either a stand-alone or peer-to-peer network
environment, your system should meet these requirements:
IBM
®
-compatible PC with a Pentium
•
recommended
Microsoft
®
Windows
•
Professional x64 Edition, or Windows XP
At least 1GB of RAM (2GB or more recommended)
•
At least 30GB of free hard disk space for software and processing files
•
Quad-speed (4×) CD-ROM or DVD drive for installing the printer
•
software
For USB connection: a Windows-compliant USB Hi-Speed 2.0 port
•
and a shielded USB "AB" cable from Series A (computer) to Series B
(printer), up to 10 feet (6 m) long
For Ethernet connection: Ethernet equipped PC and a Category 6
•
compatible cable
®
4, 3 GHz or higher processor
®
Vista,
™
Windows Vista x64, Windows XP
14