Removing Paper From The Spindle - Epson Stylus Pro 7880 User Manual

60 | Handling Paper and Other Media
Note: Opening the front
cover causes printing to
stop. Do not open the
front cover while printing
is in progress, or your
print quality might be
affected.
7. Move the paper lever to the
cover.
8. Press the Pause button (or wait for 5 seconds). The paper feeds into
printing position automatically, and
panel.
To avoid indenting or creasing the paper, remove it from the paper path and
roll it up when you are not printing.

Removing Paper from the Spindle

1. Open the roll paper cover.
2. If the paper is loaded for printing, push the paper lever back to the
position, then roll up the paper before removing it.
Released
3. Remove the roll paper and spindle from the printer.
4. Place the spindle on a flat surface.
5. Slide the black paper stop off the end of the spindle.
6. Remove the roll paper from the spindle.
position, then close the roll paper
Secured
READY
60
appears on the control