Epson Stylus Pro 7880/9880 Printer Parts Printer Specifications These illustrations show the Epson Stylus Pro 9880 but the Electrical parts are the same for the Pro 7880 unless otherwise noted. Input voltage range 90 to 264 V Front Rated frequency range...
Since the quality of any particular brand or type of paper may be For best printing results, use up a cartridge within six months of changed by the manufacturer at any time, Epson cannot attest to the opening the package.
Epson Stylus Pro 7880/9880 You can purchase optional equipment and genuine Epson ink Consumables and Accessories and paper from an Epson Professional Imaging Authorized Reseller. To find the nearest reseller, visit www.proimaging.epson.com (U.S. sales), www.epson.ca Ink Cartridges (Canadian sales), or call 800-GO-EPSON (800-463-7766).
Page 5
Selects a drying time for ink to avoid smearing printer parts and settings (from 0 to 10 seconds). NETWORK STATUS Prints a sheet showing the network settings; SHEET see the on-screen Network Guide for details. 5 - Epson Stylus Pro 7880/9880 10/07...
To prevent ink reporting errors, never replace the ink cartridges 3. Press the d button to highlight , then press TEST PRINT with the printer turned off. Menu 4. Press d to highlight , then press STATUS SHEET Menu You see PRINT 10/07 Epson Stylus Pro 7880/9880 - 6...
Page 7
If ink gets in your eyes, flush them immediately with water. 8. Lower the ink levers to their locked position. 5. Make sure the replacement cartridge is the correct color and 9. Close the ink compartment covers. remove it from its package. 7 - Epson Stylus Pro 7880/9880 10/07...
Menu Menu caused by using a paper that is not defined in the Epson power cleaning. printer driver or in a third-party RIP. To correct this problem, make sure you select the correct paper type in the driver. See 6.
Follow these steps to align the print head using the control Removing the Old Blade panel: Make sure the printer is turned on, then follow these steps to 1. Make sure the printer is turned on. Then load Epson remove the blade: Enhanced Matte Paper. 1. Press the button.
C12C890191). The printer will not print if one of the maintenance tanks is full. On the Epson Stylus Pro 9880, the right tank is used more than the left. To maximize tank life, you can switch the tanks when the right tank reaches approximately 40% to 60% of capacity.
Drivers & Downloads there are any updates posted. You may also need to download the latest version of the EPSON LFP Remote Panel utility. Check back regularly to maintain compatibility with existing and future applications. When your printer is set up and your software is installed, run the EPSON LFP Remote Panel utility to check your printer’s...