58
|
Handling Paper and Other Media
Caution: To avoid
feeding excess paper,
make sure you don't
select
when you're
using roll paper.
Caution: Do not release
the paper lever while the
P Power light is flashing,
or you may damage the
printer.
Placing the Paper in the Printer
1. Open the roll paper cover.
2. Place the roll paper in the roll holder as shown. (The black end of the
spindle goes on the left.)
3. Make sure the printer is turned on, then press the l Paper Source
button until the
appears on the LCD display.
4. Make sure the P Power light is not flashing, then release the paper lever.
(Auto Cut Off) or
58
(Auto Cut On) icon