Controlling Borderless Image Expansion - Epson Stylus Pro 7880 User Manual

90 | Printing With Epson Drivers for Macintosh
3. Select either of the following options, if desired (available only when
you've selected a Paper Size setting with the
option):
• Print Page Line
your pages.
• Save Roll Paper
the last page of your document.

Controlling Borderless Image Expansion

To control the amount of expansion when printing using a Paper Size with
the option, select
Auto Expand
You see this screen:
Adjust the slider to increase or decrease the amount of expansion.
The widths shown in the table on page 78 work with the
Expansion setting. If you use the slider to adjust the amount of expansion,
you can calculate the image width as follows:
Using the setting, subtract 0.125 inch (3.175 mm) from the media
• Min
width to determine the image width.
Using the setting, subtract 0.415 inch (10.54 mm) from the media
• Max
width to determine the image width.
prints trim lines on the right and bottom edges of
saves paper by not feeding the blank portion of
Expansion
90
Roll Paper (Banner)
from the drop-down menu.
Standard