106
|
Printing With Epson Drivers for Windows
Normal
cut
Double
cut
Single
cut
Note: These settings
override settings made
through the control panel.
8. Choose one of the following
disables automatic cutting. Choose this setting if you want to
•
Off
operate the cutter manually, use the optional Auto Take-Up Reel,
or print on heavy media that must be cut by hand. See page 61 for
instructions on operating the cutter manually.
allows images to be printed end-to-end and saves paper.
•
Single Cut
With borderless printing, you may see a sliver of the previous or
next image if you print multiple images in one print job. You will
see a white margin between print jobs.
•
Normal Cut
image.
extends the space between images and trims each print
•
Double Cut
individually. This provides the cleanest edge for borderless printing.
9. Select these additional roll paper options, if necessary:
•
Auto Rotate
the printable width of the roll. The document is automatically
rotated 90 degrees and printed crosswise. Be sure to click
and select the width of your roll paper.
Width
•
Print Page Line
your pages.
10. When your finished, click
Choosing Cut Sheet Paper Options
Follow the steps in this section to print on cut sheet paper and select settings
for borderless printing, if desired. (If you're printing on roll paper, see
page 103.)
1. On the Properties or Preferences window, make sure the
selected.
106
Auto Cut
allows margin space at the top and bottom of each
saves paper if your document length is shorter than
prints trim lines on the right and bottom edges of
.
OK
settings:
Main
Roll
tab is