Epson Stylus Pro 7880 User Manual page 67

Note: If you're using
stock more than
39 inches (99 cm) long,
load it long-edge first, in
landscape orientation
(Pro 9880 only).
6. Feed the posterboard into the paper slot until it meets resistance.
7. Align the board with the vertical line on the roll paper cover.
8. Pull the paper lever forward to the
front cover.
9. Press the Pause button or wait a few seconds. The printer feeds the
board into printing position and
10. Print your page. After it is finished, the posterboard stays in the printer.
11. To remove the print, hold it while releasing the paper lever.
Handling Paper and Other Media
Support tab
Secured
READY
67
position. Then close the
appears on the LCD display.
| 67